Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
EN
Installation Precautions
· If the size of the 3-way diverter valve does not match, please purchase
a suitable adapter separately.
· Use a water pressure gauge to measure the water pressure and
confirm that it is between 0.14 MPa and 0.8 MPa.
· Close the main water valve in your home before installation and make
sure all the water in the pipes has been drained.
· Do not connect the base station to a hot water source.
· Before installation, please unplug the base station and make sure the
base station is not connected to the power supply.
Location Requirements
· Installation location needs to avoid direct sunlight and water.
· The location is recommended to be close to the water source and floor
drain.
· It is recommended that the distance between the base station and the
socket be within 1.5 m.
· Remove any objects that are closer than 1 m from the front of the base
station.
· There should be no threshold higher than 2.2 cm near the installation
area. (If the threshold height is 2.2-3.5 cm, the official threshold ramp
needs to be purchased separately.)
· Place the base station in a location with a good 2.4 GHz Wi-Fi signal.
13
0.14-0.8 MPa
Water Source
Floor
Drain
Socket
Publicité
