Beurer BM 54 Mode D'emploi page 30

Error Possible cause
message
The inflation pressure is
higher than 300 mmHg.
The batteries are almost
empty.
Unable to transfer the
data via Bluetooth
10. DISPOSAL
Repairing and disposing of the device
• Do not repair or modify the device yourself. Proper operation can no longer
be guaranteed in this case.
• Do not open the device except for the battery compartment. Failure to
comply will invalidate the warranty.
• Repairs must only be carried out by Customer Services or authorised re-
tailers. Before making a complaint, first check the batteries and replace
them if necessary.
• The device must not be disposed of with household waste. Dispose of the
device at a suitable local collection or recycling point in your coun-
try. Dispose of the device in accordance with EC Directive – WEEE
Solution
Please take another measurement
to check whether the cu can be
correctly inflated.
Make sure that neither your arm nor
other heavy objects are pressing
on the line, and that the line is
not bent.
Insert new batteries into the device.
Please observe the information in
®
. chapter "7.6 Transferring meas-
urements".
(Waste Electrical and Electronic Equipment). Please contact the local au-
thorities responsible for waste disposal if you have any questions regarding
disposal.
Disposal of the batteries
• Used, completely discharged batteries must not be disposed of with
household waste. Dispose of the batteries in specially designated collec-
tion boxes, at recycling points or at electronics retailers. You are legally
required to dispose of the batteries correctly.
• The codes below are printed on batteries containing harmful substances:
- Pb = battery contains lead
- Cd = battery contains cadmium
- Hg = battery contains mercury
11. TECHNICAL SPECIFICATIONS
Type BM 54
Measurement Oscillometric, non-invasive blood pressure measurement
method on the upper arm
Measurement Cu pressure 0 – 300 mmHg,
range systolic pressure 50 – 250 mmHg,
diastolic pressure 30 – 200 mmHg,
pulse 40 – 180 beats/minute
Display accuracy Systolic pressure ± 3 mmHg, diastolic pressure ± 3 mmHg,
pulse ± 5% of the displayed value
Measurement Max. permissible standard deviation according to clinical
uncertainty testing: systolic pressure 8 mmHg,
diastolic pressure 8 mmHg
30