Beurer BM 54 Mode D'emploi page 24

• Avoid using this device directly next to other devices or stacked on top
of other devices, as this could lead to faulty operation. If, however, it is
necessary to use the device in the manner stated, this device as well as
the other devices must be monitored to ensure they are working properly.
• The use of accessories or replacement parts other than those specified
or provided by the manufacturer of this device can lead to an increase in
electromagnetic emissions or a decrease in the device's electromagnetic
immunity; this can result in faulty operation.
• Keep portable RF communication devices (including peripheral equipment,
such as antenna cables or external antennas) at least 30 cm away from all
device parts, including all cables included in delivery.
• Failure to comply with the above can impair the performance of the device.
5. DEVICE DESCRIPTION
The associated drawings are shown on page 3.
Cu
1
3 Cu connector
Memory buttons M1/M2
5
7 Risk indicator
Information on the display
9 Time/date
11 Diastolic pressure
13 Cardiac arrhythmia symbol
Cu line
2
4 Display
6
START/STOP button
8 Connection for cu connector
(left-hand side)
10 Systolic pressure
12 Calculated pulse value
14 Pulse symbol
User memory
15
17 Number of memory space /
memory display for
average value ( ), morning (
evening ( )
6. USAGE
6.1 Initial use
Inserting the batteries
• Remove the battery compartment cover on the back of the device
• Insert the batteries (see chapter "Technical specifications"). Insert the bat-
teries, making sure the polarity is correct according to the label
• Close the battery compartment cover.
If the symbol is displayed and does not disappear, measurement is no
longer possible. Replace all the batteries. Once the batteries have been re-
moved from the device, the date and time must be set again. Any saved meas-
ured values are retained.
Adjusting the settings
Make sure that the device's settings have been set correctly so you can make
full use of all its functions. Otherwise you will not be able to save your measured
values with the date and time and access them later.
There are two di erent ways to access the settings menu:
• Before initial use and after each time you replace the battery:
When inserting batteries into the device, you will be taken to the relevant
menu automatically.
24
Risk indicator
16
18 Release air (arrow)
19 Battery display symbol
),
20 Symbol for Bluetooth ® transfer
.
A
.
A