Thermal Expansion - Rizzoli ST Série Manuel D'utilisation

Picture 42 - Removal of the oven lamp
7.9 HANDLES MAINTENANCE
When it is necessary to replace or to tight-
en the handles of the fire door or the oven
Picture 43 - Correct position of the rounded washers
7.10

THERMAL EXPANSION

During the use, all the materials of the
thermal cooker are subjected to expansion
and little movements due to the variation
of temperature. This must not be prevent-
ed, otherwise deformations and breakings
7.11 REPLACEMENT OF THE PARTS
Most of the thermal cooker's parts are easy
to remove with a simple screwdriver. In case
of accessories or spare parts inquiry, do not
forget to quote the serial number of the
door it is essential to follow the correct se-
quence of the conic washers, see picture 43.
might happen. For this reason, the spaces
which allow the expansion inside and out-
side the thermal cooker must be kept free
and clean.
thermal cooker written on the warranty
card or in the identity plate: this is located
on the side of the wood box.
145