Rizzoli ST Série Manuel D'utilisation page 119

screws given together with the thermal
cooker. First, you must remove the final
part, which is just inserted by pressure. Then
you have to release the hex head screws
under the carrying of the handrail where
necessary. Now you can extract the handrail
bar from the carryings, then unthread the
pommels of the carryings and the bend of
the handrail.
Pictures 17 and 18 - Modification of the handrail
Now you must insert the final part where
was inserted the bend before, then remove
the carryings with the star screwdriver, re-
place the fixing screws with the screws giv-
en as endowment and finally close again the
hex head screws released before.
The ST 60 and STK models are endowed only
with the frontal handrail. It is possible to re-
quest the tools to add the handrail to one
40 mm
30 mm
117