Publicité
Les langues disponibles
Les langues disponibles
English
Engine idles or stops while idling:
► Turn the idle speed screw (LA) slowly clockwise (leaner)
until the engine runs smoothly.
21.3 Adjusting the Throttle Cable
NOTICE
It may be necessary to correct the adjustment of the throttle
cable after assembling the machine or after a prolonged
period of operation.
Adjust the throttle cable only when the unit is completely and
properly assembled.
To adjust the throttle cable:
2
► Fully depress the throttle trigger (1) and hold it in this
position.
32
1
► Carefully rotate the screw (2) in the throttle trigger in the
direction of the arrow until you feel initial resistance.
► Rotate the screw another half turn in the same direction.
21.4 Replacing the Air Filter
Dirty air filters reduce engine power, increase fuel
consumption and make starting more difficult.
If there is a noticeable loss of engine power:
► Shut off the engine, @ 12.
► Allow the blower to cool down.
2
1
3
► Loosen the screws (1).
► Remove the air filter cover (2).
► Remove the air filter element (3).
► Clean the area around the air filter with a damp cloth or a
soft brush.
► Fit the new filter in the filter housing.
► Fit the filter cover.
► Insert the screws (1) and tighten them.
21 Troubleshooting Guide
2
1
3
0458-459-8221-C
Publicité
