Publicité
Les langues disponibles
Les langues disponibles
16 After Finishing Work
5
4
► Swing the shutter (5) to the winter position
► Tighten the screw (4).
► Refit the air filter (3) and the filter cover (2).
► Insert and tighten the screws (1).
NOTICE
The winter operation setting should only be used in ambient
temperatures below 50 °F (10 °C). Use at higher
temperatures may cause the engine to overheat, resulting in
permanent damage. Always remember to return the shutter
to the configuration that is appropriate for ambient
temperature conditions.
15.2 Summer Operation
The shutter must be set to summer mode when working at
temperatures above 70 °F (20 °C).
► Shut off the engine, @ 12.
2
1
3
0458-459-8221-C
2
1
3
.
5
4
► Remove the screws (1).
► Remove the filter cover (2) and air filter (3).
► Clean the area around the air filter with a damp cloth or a
soft brush.
► Loosen the screw (4).
► Swing the shutter (5) to the summer position
4
► Tighten the screw (4).
► Refit the air filter (3) and the filter cover (2).
► Insert and tighten the screws (1).
16 After Finishing Work
16.1 Preparing for Transportation or Storage
WARNING
To reduce the risk of personal injury from unintended
activation or unauthorized use, shut off the engine before
transporting the blower or putting it down.
To prepare the blower for transportation or storage:
► Shut off the engine, @ 12.
► Wait for the engine to cool down.
English
.
2
1
3
25
Publicité
