Publicité
Les langues disponibles
Les langues disponibles
English
8 Assembling the Blower
8.1
Mounting the Blower Tube
WARNING
Never operate your blower without a properly mounted
blower tube and nozzle, @ 5.7.4. Use only attachments
supplied or expressly approved by STIHL, @ 5.4.
To mount the blower tube:
1
4
2
3
► Push the throttle cable clamp (2) onto the elbow (1).
► Line up the positioning marks (4) and push the pleated
hose (3) onto the elbow (1).
► Push the throttle cable clamp (2) onto the pleated
hose (3).
► Line up the positioning marks (4) on the throttle cable
clamp (2) and elbow (1).
The screw lug (6) should be on the underside of the
elbow/pleated hose.
► Secure the throttle cable clamp with the screw (5).
16
4
5
6
3
7
8
► Push the throttle cable clamp (7) onto the blower tube (8).
► Push the blower tube (8) into the pleated hose (3).
The mount (11) for the control handle should be facing up.
► Push the throttle cable clamp (7) onto the pleated
hose (3).
The screw lug (10) should be on the underside of the
pleated hose/blower tube.
► Secure the throttle cable clamp with the screw (9).
8.2
Mounting the Control Handle
WARNING
To reduce the risk of injury from loss of control, ensure that
the control handle is properly and securely mounted before
starting work.
To mount the control handle:
► Shut off the engine, @ 12.
2
3
8 Assembling the Blower
9
10
1
5
4
0458-459-8221-C
11
Publicité
