Setting The Cooking Timer /Alarm - ETNA KI390ZT Mode D'emploi

OPERATION
Adjust the cooking power levels
1. Touch the plus (+) key.
▷ The power level lights up.
2. Touch the minus (-) or plus (+) key to change the power level.
Stop a cooking zone
A cooking zone operate.
1. Touch the plus (+) key.
2. Touch the minus (-) key to set the power level to zero (0).
The cooking zone stops.
▷
The hob stops after 20 seconds when all cooking zones are set to zero (0) and no other
▷
functions are in use.
Stop all cooking zones at the same time
One or more cooking zones operate.
1. Touch and hold the On/Off key until you hear an audio signal.
All displays go Off and the hob stops.
▷

Setting the cooking timer /alarm

1. Start the hob.
For use as a cooking timer; select a cooking zone and power level.
▷
For use as a alarm; do not select a cooking zone and power level.
▷
▷ See chapter: Cooking-timer/alarm
2. Touch the timer key to start the timer.
The timer's display shows double zero (00).
▷
▷ A flashing point adjacent to the timer display indicates the cooking zone to which the
timer is linked (when in use as a cooking timer).
3. Touch within 10 seconds the minus (-) or timer key to select a cooking time.
Increase the time with the timer key.
▷
▷ Decrease the time with the minus (-) key.
EN 14