ETNA KI390ZT Mode D'emploi page 35

OPERATION
4. The timer has been set.
For use as a cooking timer; the cooking zone will stop after the set time has passed.
▷
For use as a alarm; do not select a cooking zone and power level.
▷
▷ You hear an audio signal.
Press the timer key to stop the alarm.
▷
Changing pre-set cooking time
Cooking time can be changed anytime during the operation.
1. Touch the plus (+) key to select the zone of which you want to adjust the timer.
▷ A flashing point identifies the zone.
2. Touch the timer key or minus (-) key to change the time.
Checking remaining cooking time
The timer display shows all timer settings. The different timer settings are shown in the
display in turn.
1. Touch the plus (+) key to select the zone of which you want to see the remaining time.
A flashing point identifies the zone.
▷
The timer will display the remaining time of the selected cooking zone.
▷
Stop the timer
If you want to stop the timer prior the end of pre-set time:
1. Touch the plus (+) key to select the zone of which you want to stop the timer.
2. Touch the minus (-) key to set the time to double zero (00).
The illuminated point adjacent to the display stops flashing.
▷
EN 15