Cooking-Timer/Alarm - ETNA KI130ZT Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATION

Cooking-timer/alarm

EN 12
Switch on Boost
1. Place the pan in the middle of a cooking zone.
2. Touch the selection key from the rear cooking zone.
▷ The '0' next to the selected cooking zone will light up clearly.
3. Select power level 9 with the minus (-) and plus (+) keys.
▷ When you select the minus (-) key directly, the cooking zone will
switch on at power level 9.
4. Directly hereafter touch the plus (+) key.
▷ Level 'P' will appear in the cooking zone display.
Switch off Boost
The boost function has been switched on, the display shows level 'P'.
1. Touch the selection key for the activated cooking zone.
2. Directly hereafter touch the minus (-) key.
▷ The 'P' will disappear from the display and the cooking zone
reduces to power level 9.
• A cooking-timer can be set for each cooking zone.
• The hob also has an alarm. Both the cooking-timer as well as the
alarm can be set for a maximum of 99 minutes.
• The alarm works in the same way as the cooking-timer, but is not
linked to a cooking zone. If the alarm has been set, it will continue
counting down after the hob has been switched off.
• The alarm can only be switched off when the hob is switched on.
Select the desired function:
1. Cooking-timer — the timer is linked to a cooking zone. After the
set time has elapsed, the cooking zone will switch off automatically.
2. Alarm — the alarm only beeps after the set time has elapsed.

Publicité

Table des Matières
loading

Table des Matières