Setting The Cooking Timer /Alarm - ETNA AKI480ZT Mode D'emploi

OPERATION

Setting the cooking timer /alarm

1. Start the hob.
▷ For use as a cooking timer; select a cooking zone and power level.
▷ For use as an alarm; do not select a cooking zone and power level.
▷ See chapter: Cooking-timer/alarm
2. Touch the minus (-) and plus (+) key simultaneously to switch on the timer.
▷ The timer's display shows double zero (00).
▷ A flashing point appears in the cooking zone display.
3. Touch within 10 seconds the minus (-) or plus (+) key to select a cooking time.
4. The timer has been set.
▷ The cooking zone will stop after the set time has passed.
An audio signal will sound for 2 minutes.
▷
▷ Press the plus (+) or minus (-) key to stop the alarm.
Changing pre-set cooking time
Cooking time can be changed anytime during the operation.
1. Touch the cooking zone key to select the zone of which you want to adjust the timer.
A flashing point identifies the zone.
▷
2. Touch the plus (+) or minus (-) key to change the time.
EN 16