Setting The Cooking Timer /Alarm; Setting The (Kitchen) Timer - ETNA KI290ZT Mode D'emploi

OPERATION

Setting the cooking timer /alarm

Timer display description
1
Flashing indicator:
1 for active left
Cooking zone
2 for active right
Cooking zone
3
for timer alarm
setting (no zone
switch off).
1. Start the hob.
▷ For use as a cooking timer; select a cooking zone and power level.
For use as a alarm; do not select a cooking zone and power level.
▷
See chapter: Cooking-timer/alarm
▷
2. Touch the timer key to start the timer.
Touch the timer key one or two times, to select the front or rear cooking zone (except for
▷
the middle cooking zone).
▷ A flashing point adjacent to the timer display indicates the cooking zone to which the
timer is linked.
The timer display shows double zero (00).
▷
3. Within 10 seconds select a cooking time with the plus (+) and minus (-) keys.
EN 14
2
3
Indicator flashing within
10 sec. after Timer key use
• set switch off time or
change switch off time.
• Setting a kitchen timer (can only be set with the timer from the
middle cooking zone).
Indicator flashing longer than
10 sec. after Timer key use
• check remaining switch off
time