Operation; Operating The Induction Hob - ETNA KI390ZT Mode D'emploi

OPERATION

Operating the induction hob

Use of the touch keys
Put the tip of your finger flat on the touch key. Do not apply pressure.
The touch keys react to a light fingertip touch. Only operate the touch keys with your finger.
The touch key gives a short audio signal when it engages.
1. Touch and hold the On/Off key until you hear an audio signal.
▷ The hob is in standby mode.
The On/Off indicator light and zero (0) flash in all displays.
▷
2. Touch a plus (+) key.
▷ Zero (0) lights up in the cooking zone display.
3. Touch the minus (-) or plus (+) key to select a cooking power level.
▷ The cooking zone starts at the set power level, visible in the display.
If the hob is not used for 20 seconds, it will stop automatically.
EN 13