Setting The (Kitchen) Timer - ETNA KC130ZT Mode D'emploi

USE
Switching on the hob and set a power level
1. Press the on/off key. A short acoustic signal will sound.
2. Press within 10 seconds the '-' or '+' key to select a cooking zone and power setting.
A short acoustic signal will sound.
3. Press the left or right extended heating zone key to switch on the extension ring. Press the
key again to switch on a third extention ring (if present).

Setting the (kitchen) timer

1. Switch on the hob and select a cooking zone and power level.
2. Press the timer key to switch on the timer.
In the timer's display flashes "00".
▷
3. Press the timer key again.
The point from the relevant cooking zone next to the timer display and the time are
▷
flashing.
EN 12