Cooking-Timer/Alarm - ETNA T380ZT Mode D'emploi

OPERATION

Cooking-timer/alarm

EN 10
Switch on (Super Power) Boost
• Place the pan in the middle of a cooking zone.
• Press the on/off button (C) for the cooking zone concerned.
The '0' next to the selected cooking zone will light up clearly.
• Select power level with the – and + buttons 9.
• When you select the – button directly, the cooking zone will switch
on at power level 9.
• Directly hereafter press the + button.
Level 'P' will appear in the cooking zone display (B).
Switch off (Super Power) Boost
The boost function has been switched on, the display shows level 'P'.
• Press the button (C) for the activated cooking zone.
• Directly hereafter press the – button (E).
The 'P' will disappear from the display and the cooking zone
reduces to power level 9.
A cooking-timer can be set for each cooking zone. The hob also has
an alarm. Both the cooking-timer as well as the alarm can be set for
a maximum of 99 minutes. The alarm works in the same way as the
cooking-timer, but is not linked to a cooking zone. If the alarm has been
set, it will continue counting down after the hob has been switched off.
The alarm can only be switched off when the hob is switched on.
Setting the cooking-timer
• Select desired cooking zone and set the power level.
• At the same time press the – and + button (E).
The timer setting is displayed in the top two displays (H). The
bottom two displays have been switched off.
• The timer setting is visible for 10 seconds, after which the power
setting is displayed.