Publicité
Les langues disponibles
Les langues disponibles
en (original)
d.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained
users.
e.
Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool's operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g.
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and
h.
grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
Battery tool use and care
5.
a.
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with another battery pack.
b.
Use power tools only with specifically designated battery packs. Use of any other battery packs may
create a risk of injury and fire.
c.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
d.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
e.
Do not use a batter pack or tool that is damaged or modified. Damaged or modified batteries may
exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
f.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature
above 130 °C may cause explosion.
g.
Follow all charging instructions and do not charge the battery pack or tool outside the temperature
range specified in the instructions. Charging improperly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
6.
Service
Have your power tool serviced by a qualified repair person using only identical replacement parts.
a.
This will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service of battery packs should only be performed by the
b.
manufacturer or authorized service providers
Safety rules for battery pack and charger
Important safety and operating instructions for your battery and charger. Before using the charger, read all instructions
and warnings on the charger, the battery pack and the tool.
If the battery pack casing is cracked or damaged, do not insert into charger. There is a danger of electric shock or
electrocution.
Do not allow any liquid to get inside charger. Electric shock may result.
This charger is not intended for any uses other than charging rechargeable batteries.
Do not place any object on top of the charger, near any heat source or place the charger on a soft surface that may
result in excessive internal heat.
Make sure the cord is located so it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
Do not use the charger if it has received a sharp blow, been dropped or otherwise damaged in any way.
Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 50 °C (122 °F).
The charger is designed to operate on standard household electrical power (100 240 VAC). Do not attempt to use it
on any other voltage.
Children should be supervised to ensure that they do not play with the appliance.
Additional Safety Warnings
Always ensure that the work piece to be sanded is firmly fixed in place.
Always remove battery during any transportation of the tool.
62
Mirka® AOS-B 130 & AROS-B 150
Publicité
