MIRKA AOS-B 130 Manuel D'utilisation page 267

Battery charger Mirka BCA 108
Degree of protection II /
Battery pack Mirka BPA 10825
Type Rechargeable
Li-ion
Battery voltage 10.8 VDC
Capacity 2.5 Ah / 27.0 Wh
Weight 0.18 kg (0.4 lbs)
Intelligent battery Yes
Noise and vibration information
The measured values may be used for comparing one tool with another and in a preliminary assessment of exposure.
Cordless
Sound pressure level (L )
pA
Sound power level (L )
WA
Sound measurement uncertainty
K
WA
*
Vibration emission value a
h
Vibration emission uncertainty K
*
Specifications subject to change without prior notice. Model range may vary between markets.
*
In order to reflect normal working conditions of the sander the operating conditions did deviate from the standard
method as follows: Grain size of the abrasive was 5 m. Feed force was 10 N.
* The values stated in the table are derived from laboratory testing in conformity with stated codes and standards and
are not sufficient for risk evaluation. Values measured in a particular work place may be higher than the declared
values. The actual exposure values and amount of risk or harm experienced by an individual are unique to each situ-
ation and depend upon the surrounding environment, the way the individual operates the machinery, the particular
material being worked, work station design and the user's exposure time and physical condition. Mirka accepts no
responsibility for the consequences of using declared values instead of actual exposure values for any individual risk
assessment.
Further occupational health and safety information can be obtained from the following websites:
https://osha.europa.eu/en (Europe) or http://www.osha.gov (USA)
Proper use of tool
This sander is designed for sanding all types of materials such as paints, metals, wood, stone, plastics, etc., using abrasives
specially designed for this purpose. Do not use this sander for any other purpose than that specified without consulting
the manufacturer or the manufacturer s authorized supplier. Do not use backing pads that have a working speed of less
than the maximum rated speed of the tool's free speed. Any maintenance or repair work requiring the motor housing to
be opened may only be carried out by an authorized service center.
Battery and charger
The battery pack is not fully charged out of the carton. First read the safety instructions and then charge your battery
according to the instructions.
For optimal charging capacity the battery should be charged at an ambient temperature between 18 °C (64 °F) and 24
°C (75 °F). To prevent damage to the battery pack, do not charge the battery pack where the air temperature is below
4 °C (32°F) or above 40 °C (104 °F).
To obtain the longest possible battery life, we suggest the following:
Mirka BPA 10850
Rechargeable
Li-ion
10.8 VDC
5.0 Ah / 54.0 Wh
0.38 kg (0.8 lbs)
Yes
AOS-B 130
61.2 dB(A)
72.2 dB(A)
3.0 dB(A)
2
2.54 m/s
1.5 m/s 2
PA
Mirka BPA 11125 Mirka BPA 11150
Rechargeable Rechargeable
Li-ion Li-ion
11.1 VDC 11.1 VDC
2.5 Ah / 27.75 Wh 5.0 Ah / 55.5 Wh
0.18 kg (0.4 lbs) 0.38 kg (0.8 lbs)
Yes Yes
AROS-B 150
61.6 dB(A)
72.6 dB(A)
3.0 dB(A)
2
1.9 m/s
1.5 m/s 2
Mirka® AOS-B 130 & AROS-B 150
en | us-ca
267