Suspensions
Front
Hydraulic upside-down fork.
The front fork fitted to the SS1000 model features outer
adjusters for rebound, compression, and preload (for
inner springs of fork legs).
Stanchion diameter:
43 mm.
Travel along leg axis:
120 mm.
Rear
The rear shock absorber enables the adjustment of
rebound and compression damping and spring preload.
At the bottom pivot point it is connected to the
swingarm. Swingarm is made from steel or aluminum
(SUPERSPORT1000 only) and hinges on a pivot pin
passing through the engine. The whole system gives the
bike excellent stability.
The SUPERSPORT 1000 shock absorber features also
total length adjustment. Standard length is 336 mm and it
cannot be reduced by 4 mm or increased by 8 mm. The
seat height can thus be adjusted regardless the spring
preload.
Travel:
71 mm
Rear wheel travel:
136 mm (SS800);
145 mm (SS1000)
Exhaust system
Catalyzed in compliance with emission regulations.
Available colors
SUPERSPORT800
Ducati Anniversary red 473.101 (PPG)
Metal-color rims and frame.
Silver grey *0022 (PPG)
Black rims and frame.
SUPERSPORT1000
Ducati Anniversary red 473.101 (PPG)
Ducati yellow 473.201 (PPG)
Metal-color rims and frame.
Dark grey *0017 (PPG)
FLUO red rims and metal-color frame.
E
73