MINN KOTA RIPTIDE TERROVA Manuel Du Propriétaire page 17

3
e. To install the Ethernet Cable, align the pins on
the Advanced GPS Ethernet Connector with the
Receptacle on the Ethernet Cable. Notice the keyed
connectors. Tighten the Collar from the Ethernet
Cable to secure the connection.
f. The Ethernet Cable will plug directly into a Solix
or Helix Fish Finder or directly into a Helix
Adapter Cable.
NOTICE: A 30' Ethernet Extension Cable
- 30' Ethernet Extension Cable -
from humminbird.johnsonoutdoors.com
be used if the standard 30' Ethernet Cable provided
with your trolling motor is not long enough to reach the
fish finder.
4
g. If installing directly to a Solix or Apex, the connector
will be flat on the back of the fish finder display.
h. Align the Receptacle on the Ethernet Cable with the
Eight Pin Connector on the Apex or Solix fish finder.
Notice the keyed connectors. Tighten the Collar
from the Ethernet Cable to secure the connection.
Once directly installed to the Solix or Apex, the
connection is complete.
©2024 Johnson Outdoors Marine Electronics, Inc.
(AS ECX 30E
760025-1) is available
and should
ADVANCED GPS NAVIGATION
Eight Pin Eight Pin
Connector Connector
Advanced GPS Ethernet Advanced GPS Ethernet
Connector from Trolling Motor Connector from Trolling Motor
Ethernet Ethernet
Cable Cable
Receptacle Receptacle
Ethernet Ethernet
Cable Cable
Receptacle Receptacle
Eight Pin Connector Eight Pin Connector
on Solix or Apex on Solix or Apex
Fish Finder Fish Finder
minnkota.johnsonoutdoors.com | 17