MINN KOTA RIPTIDE TERROVA Manuel Du Propriétaire page 13

8
p. Replace the four sideplate screws using a #3 Phillips
Screwdriver. Two of these screws will be located on
each side of the mount.
Powering on the Wireless Remote
1
ITEM(S) NEEDED
a. Power on the trolling motor.
b. To turn on the Wireless Remote (Item #7), press and
hold the Power
c. A message will appear on the display screen. Read
the disclaimer, then press the Steer Right
to select "I Agree."
d. The content on the display screen will populate.
Remote functions to manually control the motor are
now active, including Speed Up
, Steer Left , Steer Right , and Prop On/Off.
e. When the Advanced GPS Navigation system has
obtained a minimum GPS signal strength of one bar,
all remaining functions will become available.
NOTICE: Attaching the Lanyard (Item #6) to the
Wireless Remote is optional.
©2024 Johnson Outdoors Marine Electronics, Inc.
#7 x 1
button on the side of the Remote.
button
, Speed Down
POWERING ON THE WIRELESS REMOTE
#6 x 1
Wireless Wireless
Remote Remote
Power Power
Button Button
NOTICE: The Wireless Remote comes from the factory
paired to the Riptide Terrova.
NOTICE: A Remote Cradle accessory (1866675) can be
purchased for mounting the Wireless Remote or attaching
the Remote to a belt clip.
Sideplate Screw Sideplate Screw
minnkota.johnsonoutdoors.com | 13