Publicité
Les langues disponibles
Les langues disponibles
Transmitter Setup
1. Power ON your transmitter, click on scroll wheel, roll to System Setup and click the scroll wheel. Select YES.
2. Go to Model Select and choose Add New Model at the bottom of the list.
The system asks if you want to create a new model, select Create.
3. Set Model Type: Select Airplane Model Type by choosing the airplane.
The system asks you to confirm model type, data will be reset. Select YES.
4. Set Model Name: Input a name for your model file.
5. Go to Aircraft Type and scroll to the wing selection, choose Wing: 1 Normal Tail: Normal
6. Select Main Screen, Click the scroll wheel to enter the Function List.
7. Set D/R (Dual Rate) and Expo: Aileron
Set Switch: Switch F
Set High Rates: 100%, Expo 10% — Low Rates: 70%, Expo 5%
8. Set D/R (Dual Rate) and Expo: Elevator
Set Switch: Switch C
High Rates: 100%, Expo 10% — Low Rates 70%, Expo 5%
9. Set D/R (Dual Rate) and Expo: Rudder
Set Switch: Switch G
High Rates: 100%, Expo 10% — Low Rates 70%, Expo 5%
10. Set Throttle Cut; Switch: Switch H, Position: -100%
1. Power ON your transmitter and begin once the Spektrtum AirWare app is open. Select the orange pen icon in the
screen's upper left corner, the system asks for permission to Turn Off RF, select PROCEED.
2. Select the three dots in the upper right corner of the screen, select Add a New Model.
3. Select Model Option, choose DEFAULT, select Airplane.
The system asks if you want to create a new acro model, select Create.
4. Select the last model on the list, named Acro. Tap on the word Acro and rename the file to a name of your choice.
5. Press and hold the back arrow icon in the upper left corner of the screen to return to the main screen.
6. Go to the Model Setup menu. Select Aircraft Type. The system asks for permission to Turn Off RF,
select PROCEED. Touch the screen to select wing. Select Normal.
7. Press and hold the back arrow icon in the upper left corner of the screen to return to the main screen.
8. Go to the Model Adjust menu.
9. Set Dual Rates and Expo: Select Aileron
Set Switch: Switch F
Set High Rates: 100%, Expo 10% — Low Rates: 70%, Expo 5%
10. Set Dual Rates and Expo: Select Elevator
Set Switch: Switch C
High Rates: 100%, Expo 10% — Low Rates 70%, Expo 5%
11. Set D/R (Dual Rate) and Expo: Rudder
Set Switch: Switch G
High Rates: 100%, Expo 10% — Low Rates 70%, Expo 5%
12. Set Throttle Cut; Switch: Switch H, Position: -100%
DX Series Transmitter Setup
iX Series Transmitter Setup
EN
5
Publicité
