Publicité
Les langues disponibles
Les langues disponibles
Prepare the Milk Frother
1. Place a container with a minimum capacity of 3-5
ounces beneath the milk frother (11).
2. Rotate the hot water/steam knob (8) to the ON
position (line the knob up with the
droplets symbol), discharge 3-5 ounces of hot
water, and then rotate the knob to OFF.
Operating Modes
Standby Mode
Once the machine is switched on, it automatically goes
into Standby mode, awaiting a command. In Standby
mode, the single cup button (2) and the double cup
button (3) indicator lights stay lit, and the thermoblock
technology maintains the temperature.
Programming Mode
You can program the espresso maker to the ideal
temperature and to account for water hardness, each of
which can impact the quality of your coffee. To enter
Program mode:
1. Make sure the machine is in Standby mode.
2. Press and hold the steam button (4) for 5 seconds.
3. When the indicator lights on the buttons flash
consecutively, the programming menu has been
accessed.
NOTE: If the machine is inactive for 15 seconds, it
automatically switches to Standby mode.
To program the temperature:
1. When in Programming mode, press the single cup
button (2) to enter the temperature settings.
2. Once pressed, take notice of the indicator lights,
which ones are on or off, and compare them with
the table below to interpret the current temperature
level. In the following table, an "X" indicates a light
is ON. NOTE: The default temperature setting is
HIGH.
Instruction Booklet
NOTE: If the hot water/steam knob (8) is in the ON
position when the machine is turned on, the machine
will generate an alarm and both the single cup button
(2) and the double cup button (3) indicator lights will
flash. To stop the alarm, turn the hot water/steam knob
(8) to OFF.
steam/water
3. The lights will now flash sequentially. Press the
4. Once you have made your choice, the single cup
5. The machine automatically exits from the menu
7 of 50
Temperature
Single
Level*
Cup
Button
Low
(70+/-5°C)
Medium
(75+/-5°C)
High
(80+/-5°C)
* Temperature may vary depending on external
conditions.
button corresponding to the temperature level you
want:
a. For low temperature, press the single cup
button (2).
b. For medium temperature, press the double
cup button (3).
c. For high temperature, press the steam
button (4).
button (2) will flash quickly to confirm that your
selection was accepted, and the machine will beep
twice.
when the temperature has been set and is ready for
normal use.
ESP-2016
Double
Steam
Cup
Button
Button
X
X
X
X
X
X
Publicité
