Clamping The Wheel - Mondolfo Ferro Startline S 524 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

- Press the pedal
the bead breaker and detach the bead from
the rim.
Repeat this operation on the other side of the
wheel.
It may be necessary to break the bead at several
points to free it completely.
Release the pedal to reverse the motion of the
bead breaking shoe.
After detaching the beads, remove the old
balancing weights.
- Thoroughly lubricate the sides of the tyre around the entire circumference of the lower and
upper bead to facilitate demounting and avoid damaging the beads (fig.17).

9.4. CLAMPING THE WHEEL

Keep your hands and other body parts away from moving parts of the machine while moving
the wheel locking wedges.
If the wheel weighs more than 10 kg, with a lifting frequency of more than 20 wheels/
hour, it is recommended to use a lifting device (optional).
Only for Startline S 521 - S 524:
- Pull the unlocking button
"non-working" position (tool at the top and the horizontal arm completely retracted) (A Fig. 18B).
- Press button
lock the arms into the "non-working" position.
- Press pedal
column into the "non-working" position (B Fig.
18B).
Startline S 424-S 421-S 521-S 524 Operator manual
(fig.16) to operate
WARNING
WARNING
(position Z, Fig.18A) to position the operating arms in the
(position Y, Fig. 18A) to
(C, Fig. 18C) to take the
17
UK
18A
119

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Startline s 521Startline s 421Startline s 424

Table des Matières