Publicité
Les langues disponibles
Les langues disponibles
en-us Cooktop operation
Stir-fries
Spring rolls
Camembert / cheese
Miscellaneous
Camembert / cheese
Dried ready meals
Croutons
Toasting almonds, nuts, pine nuts
8.13 Panel lock
You can use the panel lock to prevent the cooktop from
being turned on accidentally.
CAUTION
The panel lock may be turned on and off accidentally due
to:
water spilled during cleaning
▶
food that has overflowed
▶
objects being placed on the panel lock touch key.
▶
Activating the panel lock
Requirement: The cooktop is turned off.
Touch panel lock/Panel Lock for 4 seconds.
▶
a The indicator over the panel lock key lights up for
10 seconds.
a The control panel is locked.
Deactivating the panel lock
Requirement: The cooktop is turned off.
Touch panel lock/Panel Lock for 4 seconds.
▶
a The control panel is unlocked.
Automatic panel lock
This function automatically activates the panel lock when
you switch off the cooktop.
The automatic panel lock can be activated in the basic set-
tings → Page 34 .
8.14 Wipe protection
With this function you can avoid changing the settings
while cleaning the control panel during cooking.
This function does not lock the main switch. You can turn
the cooktop off at any time.
Activating the wipe protection
Press panel lock/Panel Lock.
▶
a The indicator above the panel lock key lights up.
a The control panel is locked for 35 seconds.
a After 30 seconds a beep indicates that the wipe protec-
tion is about to turn off.
Deactivating the wipe protection
Press panel lock/Panel Lock.
▶
a The indicator above the panel lock key goes out.
34
low
med
low
low
min
low
med
8.15 Basic settings
You can configure your appliance to meet your needs.
Basic settings overview
Here you can find an overview of the basic settings and
the preset factory settings.
Display
Function
Panel lock
– Manual
– Automatic
– Function deactivated
Signal tones
– Confirmation signal and error signal are
off. The main switch signal remains on.
– Only error signal is on.
– Only confirmation signal is on.
– Confirmation signal and error signal are
on.
1
Display energy consumption
– Deactivated.
– Activated.
Duration of timer end signal
– 10 seconds
– 30 seconds
– 1 minute
Power management function. Limiting the to-
tal power of the cooktop. The available set-
tings depend on the maximum power of the
cooktop.
– Deactivated
– 1.000 W minimum power
– 1.500 W
...
– 3.000 W recommended for 13 A
. – 3.500 W recommended for 16 A
– 4.000 W
. – 4.500 W recommended for 20 A
...
or . – Maximum power of the cooktop
Changing the preset power levels for Power-
Move®
- Preset power level for the front cooking
zone.
- Preset power level for the middle cook-
ing zone.
- Preset power level for the rear cooking
zone.
1
Factory setting (may vary according to model)
6 - 10
10 - 30
10-15
7 - 10
5 - 10
6 - 10
3 - 15
1
1
1
1
,
Publicité
