Bosch HII8057U Manuel D'utilisation page 30

en-us Cooktop operation
Changing or canceling the kitchen timer - 800 Series
Press Timer.
1.
Set the desired time in the settings area.
2.
To cancel the kitchen timer, set the time to ⁠ ⁠ .
Setting the kitchen timer - Benchmark® Series
WARNING
Boilovers can cause smoke and some foods and oils may
catch fire if left on high temperature settings.
When using a timer, always supervise the cooktop.
▶
Do not allow anything to boil over or burn.
▶
Press kitchen timer.
1.
lights up in the timer display.
a
a The indicator above kitchen timer lights up.
Set the desired time in the settings area.
2.
Press kitchen timer to confirm.
3.
a The time starts to count down after a few seconds.
a When the time has elapsed, a beep sounds.
the timer display.
a The indicator above kitchen timer blinks.
Press any key to turn off the signals. After 10 seconds
4.
the signals stop automatically.
Changing or canceling the kitchen timer - Benchmark
Series
Press kitchen timer.
1.
Set the desired time in the settings area.
2.
To cancel the kitchen timer, set the time to ⁠ ⁠ .
Press kitchen timer to confirm.
3.
8.8 Count-up timer
The Count-up timer displays the time that has elapsed
since activating the function.
The Count-up timer works independently from the cooking
zones and from other settings. This function does not au-
tomatically switch off a cooking zone.
Starting the Count-up timer
WARNING
Boilovers can cause smoke and some foods and oils may
catch fire if left on high temperature settings.
When using a timer, always supervise the cooktop.
▶
Do not allow anything to boil over or burn.
▶
Press count up timer.
▶
lights up on the timer display.
a
a The indicator above count up timer lights up.
Canceling the Count-up timer
Press count up timer.
1.
a The timer stops running.
Press count up timer again.
2.
a The timer is cleared and turns off.
30
8.9 SpeedBoost®
With this function you can heat larger quantities of water
faster than with power level 9. This function temporarily in-
creases the top output of the selected cooking zone.
You can also use this function on the flexible cooking zone
if it is used as a joined cooking zone.
Restrictions for using the SpeedBoost® function
¡ This function can only be used on one cooking zone of
the same cooktop segment at a time. The illustration
shows these segments of your cooktop.
¡ If the function is not available,
play of the selected cooking zone. The power level
set automatically.
800 Series
blinks in
Benchmark® Series
Activating SpeedBoost®
Select the desired cooking zone.
1.
Touch speed boost/Speed Boost.
2.
lights up in the cooking zone display.
a
Deactivating SpeedBoost®
Select the required cooking zone.
1.
Press speed boost/Speed Boost.
2.
goes out.
a
a The cooking zone switches to power level ⁠ .
Notes
¡ In certain circumstances, this function may switch off
automatically in order to protect the electronic elements
inside the cooktop.
¡ If you have set a power level before activating the func-
tion, this power level is used automatically after the
function has been deactivated.
8.10 ShortBoost
With this function you can heat cookware faster than with
power level ⁠ .
You can also use this function on the flexible cooking zone
if it is used as a joined cooking zone.
Recommendations for using this function:
¡ Always use cookware that has not been pre-heated.
¡ Use cookware with a flat base.
and blink on the dis-
is