Télécharger Imprimer la page

CONSTRUCTA CH1102 4 Serie Notice D'utilisation page 41

Publicité

Les langues disponibles

Les langues disponibles

Inserting accessories
The accessories are equipped with a locking function. The
locking function prevents the accessories from tilting when they
are pulled out. The accessories must be inserted into the
cooking compartment correctly for the tilt protection to work
properly.
When inserting the wire rack, check
that the lug (a) is pointing downwards
that the lug (a) is in the rear part of the wire rack
When inserting the baking tray or the universal pan, check
that the lug (a) is in the rear part of the of the accessory
that the sloping edge of the accessory faces towards the
appliance door when it is inserted
Before using the appliance for the first time
Clean your appliance before using it for the first time.
Remove accessories and any remaining packaging from the
1.
cooking compartment.
Clean the accessories and cooking compartment with hot
2.
soapy water (see section: Cleaning and care).
Operating the appliance
In this section, you will find out how to switch your appliance on
and off, and how to select an operating mode and temperature.
Switching on the appliance
Oven lighting
Turn the operating mode and temperature selector clockwise to
the \ position to switch on the oven lighting.
Top/bottom heating
Turn the operating mode and temperature selector clockwise to
the required temperature to switch on the Top/bottom heating
operating mode.
Top heating
Turn the operating mode and temperature selector clockwise to
the # position.
Shelf positions
The cooking compartment has four shelf positions. The shelf
positions are counted from the bottom up.
Optional accessories
You can purchase optional accessories from the after-sales
service or specialist retailers.
Accessories
Baking tray, aluminium
Baking tray, enamelled
Universal pan with wire insert
Wire insert for roasting and grilling, to be
used in the universal pan
Baking and roasting wire rack
Pizza tray
System steamer
Telescopic shelf x2
Telescopic shelf x3
Telescopic shelf with full extension x4
Heat with % Top/bottom heat at 240°C for 60 minutes.
3.
Afterwards, wipe the cooled cooking compartment with hot,
4.
soapy water.
Clean the outside of the appliance with a soft, damp cloth
5.
and soapy water.
Bottom heating
Turn the operating mode and temperature selector clockwise to
the $ position.
The r indicator light lights up while the appliance is heating up
and during any subsequent heating.
Switching off the appliance
Turn the operating mode selector back to the Û position.
1.
Turn the temperature selector back to the Ú position.
2.
After the appliance is switched off, the cooling fan may
continue to run.
Order no.
CZ 1332 X0
CZ 1342 X0
CZ 1242 X1
740766
CZ 1432 X1
CZ 1352 X0
CZ 1282 X3
CZ 1702 X2
CZ 1742 X2
CZ 1755 X2
41

Publicité

loading