Scope Of Delivery; Technical Data - Mesto PRIMER 3237P Mode D'emploi

GB IRL
+
You will find the illustrations referred to above in the front fold-out pages 3 – 5 of
these Instructions for Use.

Scope of delivery

Tank [1] with pump [2], hose [3] with discharge filter [6], shut-off valve [4], instruc-
tions for use [5], carrying strap [7] and spray wand [8]. (Fig. 1)

Technical data

Type of device
Max. filling amount
Total contents
Max. spraying pressure
Max. operating temp¬erature
Weight when empty / Gross weight max. 1.5 / 6.5 kg (3.3 / 14 lb)
Material of tank
Spray wand
Where device is carried
Technical residual quantity
Max. volume flow
Recoil force
Table 1
Assembly
1. Fasten the carrying strap [6] on the tank [1] (Fig. 2)
2. Push the hose [3] with the discharge filter [6] into the tank and secure it with the cap nut
[9]. (Fig. 3)
3. Push the tube [3] into the shut-off valve [4] and secure it with the cap nut. (Fig. 3)
4. Screw the spray wand [8] onto the shut-off valve [4] (Fig. 3)
Checks
Visual inspection:
wand [8] with nozzle [16] undamaged? (Figures 1, 3, 18)
+
Pay special attention to the connections between the tank – hose and the hose – shut-
off valve and to the condition of the pump threading and spray wand.
No leaks: Pump up the empty device to 2 bar (Fig. 10).
► The pressure must not decrease more than 0.5 bar within 30 minutes.
Function: Pull up the piston pressure gauge [10] (Fig. 4)
► The pressure must dissipate.
Activate the shut-off valve [4] (Fig. 12)
► The shut-off valve must open and close.
Have damaged parts or parts that do not work properly repaired immediately by
our customer service department or by service partners authorized by us.
AUS USA
PRIMER 3237P
Are tank [1], pump [2], hose [3], shut-off valve [4] and spray
15
NZ
5 l (1.1 gal)
6.9 l (1.5 gal)
3 bar (43.5 psi)
30 °C (86 °F)
polyethylene
plastic 48 cm (18.9 in)
on the side
< 0.04 l (< 0.01 gal)
1.0 l/min (0.22 gal/min)
< 5 N
CDN IND
PRIMER 3278P
8 l (1.8 gal)
10 l (2.2 gal)
40 °C (104 °F)
3 / 11 kg (6.6 / 24 lb)