Putting The Machine Into Service; Battery - Warning - Grillo FD 220R Manuel D'utilisation

TYRES: front: 16×7.50-8 TURF WHEELS; rear: 13×5.00-6 TURF WHEELS.
PARKING BRAKE: disc brake.
STEERING RADIUS: 30 cm.
CUTTING DECK: front cutting deck with collection, total width 860 mm. Pedal "Easy-Up" system for deck
lifting. Anti-puncture solid wheels.
CUTTING SYSTEM: with one rotating blade.
CUTTING WIDTH: 800 mm.
CUTTING HEIGHT: 7 positions ranging from 30 to 90 mm.
GRASS CATCHER: 200 litres with magnetic closing system and automatic opening during discharge.
HOURLY MOWING CAPACITY: 4000 m2/h (approx.).
TOW BAR AS STANDARD FEATURE
ATTACHMENTS: mulching kit, side discharge kit.
SIZE & WEIGHT: Length: 2345 mm – Width: 860 mm – Height: 1140 mm
Weight: 255 kg (with INTEK 3130) - 260 kg (with VANGUARD 14 HP)
1) Check that the machine is complete and has not been damaged during transport.
2) Check the engine oil level.
3) Check the tyre pressure:
Front wheels 16×7.50 – 8 (1,2 BAR)
Rear wheels 13×5.00 – 6 (1,2 BAR)
4) Check the battery voltage; it must be at least 12 Volts. Charge the battery if necessary.
IMPORTANT!!! When fitting the battery, ensure that the poles are correctly connected. Never start the
engine if the battery is not connected.
5) Warning! The expansion tank of the hydrostatic transmission must be empty. The correct level is 12 mm
beneath the bottom of the expansion tank (fig. 22). No other procedures are required.
BATTERY – WARNING!
The gases released by the battery are explosive, keep it away from sparks or naked lights. Check the
terminals periodically and keep them greased.
RUNNING-IN – WARNING!!
Change the engine oil after the first 20 hours. Check that there are no oil leaks or loose screws, especially the
blade fixing screws.
FD220R/ Translation of the original instructions

PUTTING THE MACHINE INTO SERVICE

9