Télécharger Imprimer la page

Angelo Po FX61 E 2 Manuel D'installation Et Mode D'emploi page 29

Publicité

For enable / disable the function of cooldown
during cooking:
With the appliance in the STOP phase
(green light of button (16) on) press the
button (12) and hold it down for longer than
3 seconds (the whole panel powers down).
Press the key (19) and turn knob (21)
to select "cooldown ON/OFF" function.
Press button (19) to save the selected
function.
IMPORTANT _________________________
Do not use this function while cooking is in
progress.
With "Semiautomatic washing" function activated:
Press the (16) button to start semi-automatic
washing.
20. The "delay start" button: is used to start
delayed cooking.
Press button (20) and the display (8) will show
the max. delay start time (1 hours).
Press button (5) and and turn knob (21) to set
the desired value.
Press knob to store the value and then press the
(16) button to begin the delayed start.
To interrupt the countdown and exit from the function,
press button (16) (cooking does not start).
If you wish to start cooking before the set time has
elapsed, press button (5) and turn knob (21) to bring
the value displayed (8) to "0".
21. Control knob: varies the values of the functions
selected (see buttons (4-5-6-10)).
Turn knob clockwise to increase value and
counter-clockwise to decrease value.
Used to modify the appliance's cooking
and washing, programming and functional,
parameters.
Also confi rms and saves: press knob to
confi rm and/or save selected settings shown
on the display.
22. ON/OFF button: turns the appliance's power
supply on and off (I=ON; O=OFF). In models
FX201 and FX202, the ON/OFF button is located
on the left side of the control panel.
1
7
4
5
6
12
13
16
17
18
21
Combination Oven Installation and Operation Manual
Section 5
Operation
2
3
8
9
10
11
15
14
20
19
22
29

Publicité

loading