Publicité
Section 5
Operation
•
The button (18) modifi es the pre-set
standard regeneration programs.
Press the button to show the program of
choice on display (7).
Press button (16) to start the selected
program.
Once the program has been started, only keys
(4-5-6-10) and knob (21) can be used to modify
the values set for the current stage.
During cooking, buttons (1-2-3) can be used
to modify the cooking mode.
Note: Changes made in this way only remain
active for the current cooking process; to save
them permanently, press the cooking mode
button (1-2-3) being used for at least 3 seconds.
IMPORTANT _________________________
To return to the original settings, with the
appliance in STOP mode (icon (16) is lit
with a green light) press and hold button
(12) longer than 3 seconds (as the entire
panel powers down) then press and hold
button (18) until PrG ok appears.
19. Quick cooling key/Semiautomatic washing:
•
Press the button (19) once to select the
"Semiautomatic wash" function (the display
(7) shows the text "CLE", the display (8)
shows the text "Pr", the display (9) shows
the text "P01".
•
Press the button (19) twice to select
"Semiautomatic wash" (the display (7)
shows the text "CLE", the display (8) shows
the text "Pr", the display (9) shows the text
"P02").
•
Press the button (19) three times to select
the "quick cooling" function.
28 Combination Oven Installation and Operation Manual
1
7
4
5
6
12
13
16
17
18
21
With the "quick cooling enabled" function:
•
For cooling the cooking chamber quickly
with the door closed:
Press the button to display the wording
"100°C" on (7) and the wording "CLd" on (8).
Press the key (4) and turn the knob (21)
to set the cooling temperature required.
Press the key (16) to start the program.
At the end of the cycle the appliance shuts down and
a buzzer sounds.
2
3
8
9
10
11
15
14
20
19
22
Publicité
