BORETTI CFBI 601601 AN Mode D'emploi page 203

* Once the desired power is displayed, turn any cooking zone control knob to
"0", within 5 seconds: the selected power will remain steadily on the display.
To select it definitively, turn the other cooking zone control knobs to "0". The
new maximum power limit for the induction hob is now set.
Managing power while using the
hob
When using several cooking zones,
if the total power set in the zones
is greater than the maximum
power limit for the hob, an audible
alert (beep) will sound and the last
cooking zone set will show " "
alternately with the selected power;
then the power of that zone will be
reduced automatically to fall within
the permitted limit.
" " indicates that the power of the cooking zone has been lowered, and
that the control knob is not in the exact position corresponding to the new
power level set automatically by the system.
Therefore, after turning the knob to the set power level, or a lower power
level, " " will disappear and the audible alert will no longer sound.
Thermal protection
The induction cooktop is fitted with safety devices to protect the
electronic system and each cooking zone from overheating.
203