Publicité
Les langues disponibles
Les langues disponibles
After cleaning, replace the inner glass pane
When replacing the inner glass pane, make sure that:
* You replace the pane correctly, as shown. The pane must be in the position
described below in order to fit into the door and to ensure that the oven
operates safely and correctly.
* You take extra care not to bump the edges of the glass against any object
or surface.
* You do not force the pane into place. If you are experiencing difficulties
replacing the pane, remove it and start the process again from the
beginning. If this still does not help, call Customer Care.
To reassemble the inner pane of the oven door operate as follows:
1. Make sure the door is locked open (see fig. 6.22).
2. Replace the inner pane:
*
Check that the four rubber pads are in place ("D" in fig. 6.22).
Important
It is advisable, while refitting the glass, to keep pressed in position the
four rubber pads "D", by a finger, to avoid breakage or slippage of the
rubber pads themselves (fig. 6.22).
D
Fig. 6.22
Fig. 6.24
*
Check that you are holding the pane the correct way. You should be able
to read the wording on it as it faces you.
*
Insert the pane in the left "E" and right "F" slide guides (fig. 6.23), and
gently slide it to the retainers "H" (fig. 6.24).
A
Fig. 6.23
E
Click
H
Fig. 6.25
Click
230
F
Publicité
