Publicité
Les langues disponibles
Les langues disponibles
Fig. 1.2
Fig. 1.3
B
Fig. 1.4
Fitting the adjustable feet and
levelling the cooker
The adjustable feet must be fitted
to the base of the cooker before use
(fig. 1.2).
Rest the rear of the cooker on a
piece of the polystyrene packaging
exposing the base for the fitting of
the feet.
Fit the 4 legs by screwing them tight
into the support base as shown in
figure 1.2.
Levelling the cooker
The cooker may be levelled by
screwing the lower ends of the feet IN
or OUT (fig. 1.3).
Fixing the backguard
Before installing the cooker, assemble
the backguard "B".
The backguard "B" can be found
A
A
packed at the rear of the cooker.
1. Before assembling, remove any
protective film/adhesive tape.
2. Remove the three screws "A" from
the rear of the cooktop.
3. Assemble the backguard as shown
and fix it by screwing the three
screws "A".
186
Publicité
