Publicité
Les langues disponibles
Les langues disponibles
Error code on the display/s
If an error message appears on the display/s
(the display/s show/s "
F
alternating - e.g. "
" and "
1. Disconnect the cooktop from themains.
2. Reconnect the cooktop and turn it on.
3. Wait for about two minutes and if theproblem
does not appear the cooktopcan be used.
4. If the problem does not disappearrepeat step
from 1 to 3.
5. If the problem continues, disconnectthe cooktop
from the mains and contact your Authorised
Service Centre.
Display/s off or not correctly operating
If a display or the displays are only partially
lit or not lit.
1. Switch off the cooktop and disconnectit from
the mains.
2. Reconnect the cooktop and turn it on.
3. Wait for about two minutes and if theproblem
does not appear the cooktopcan be used.
4. If the problem does not disappearrepeat step
from 1 to 3.
5. If the problem continues, disconnectthe cooktop
from the mains and contact your Authorised
Service Centre.
Cleaning the ceramic hob
Before you begin cleaning, disconnect the cooktop from mains power supply.
* Remove spillages and other types of incrustations.
* Dust or food particles can be removed with a damp cloth.
* If you use a detergent, please make sure that it is not abrasive or scouring.
Abrasive or scouring powders can damage the glass surface of the hob.
* All traces of the cleaner must be removed with a damp cloth.
* Dust, fat and liquids from food that has boiled over must be removed as
soon as possible.
* If they are allowed to harden they become increasingly difficult to remove.
This is especially true in the case of sugar/syrup mixtures which could
permanently pit the surface of the hob if left to burn on it.
F
" and another character
F
0
l
", "
" and "
", .....) :
205
Publicité
