Publicité
Les langues disponibles
Les langues disponibles
Control knobs
Each cooking zone is adjusted by a
separate control knob positioned on
the control panel and the operation is
controlled by the electronic system.
If a cooking zone is not turned Off
the electronic system automatically
switches it Off after a pre-set time
which depends on the power setting.
Note
The knob and symbols may vary.
1 ÷ 9 Power level
Turn the knob clockwise to set the desired power level between "1"
(minimum) and "9" (maximum).
The power level can be modified at any time by turning the knob
clockwise or anti-clockwise to a different setting. Each new selection
made by turning the knob is accompanied by an audible alert "beep"
and the cooking zone display shows the selected level.
Booster function
This function allows the cooking
zone to operate at the Booster
maximum power (above the
nominal power) for maximum
10 minutes; it could be used, for
example, to rapidly heat up large
amount of water.
To activate the "Booster" function,
turn the knob to "P" (fig. 3.2).
At the end of the Booster program
(10 minutes) the cooking zone is
automatically turned off, a "beep" sounds and " " appears on the display
(indicating that the cooking zone is not active and that the knob is not in
the off position). Set the knob to "0" to switch off the cooking zone, then
reset the desired power level.
Fig. 3.1
Fig. 3.2
199
Publicité
