inventiv INV E1637 P Notice Originale D'utilisation page 54

Mulching with the mulch kit (optional)
NOTE:
E1637 P.
When mulching, the grass cuttings are not collected, but are left on the lawn. The
grass mulch prevents the soil from drying out, and supplies it with nutrients.
The best results are obtained by cutting back regularly by about 2cm. Only young
grass with a soft leaf texture decomposes quickly.
Inserting the mulch kit(12)
WARNING
Before inserting or removing the mulch kit, switch off the device,
disconnect the power cable and wait until all mowing parts have
come to a standstill.
1. Open the rear flap (3) and hold it in position.
2. Remove the grass bag (9) if necessary
3. Insert the mulch kit (12) into the rear discharge. Ensure the pins under the mulch
kit snap into the respective cut-outs of the deck.
NOTE:
the mulch kit and the mower blade may be damaged.
Removing the mulch kit
1. Lift the rear flap
2. Lift the mulch kit to release and remove the mulching kit.
Mulching insert is only available for mower type INV
! Risk of injury!
If the mulch kit is not properly locked into position, both
3
12
54