inventiv INV E1637 P Notice Originale D'utilisation page 51

Assemble
4. Assembling and attaching the grass bag.
a. Slide the plastic profiles over the metal frame. Maks sure the profiles completely
enclose the frame, lest they slide off during use.
b. Raise up the rear flap.
c. Hang the collection bag on the hooks.
5. Connection to the power supply
Connect the extension cord to the appliance inlet on the switch box.
About 30 cm from the end, creade a loop in the cable. Guide
the loop through the oval hole of the cable strain relief, and
over the hook. Carefully pull it tight.
Connect the plug to the power supply.
WARNING!
and current must comply with the information on the rating
label. Always use a power supply protected by a residual-
current-operated protective device RCD). If using an extension
cord, ensure it is of the proper size and type for your product
(≥1.5mm2). Use an extension cord specifically designed for
outdoor use.
10
Check the voltage and current! The voltage
51