inventiv INV E1637 P Notice Originale D'utilisation page 53

WARNING!
of the handle is limited by the toothed area. To not attempt
changing the height outside this range!
Switching on/off
1. Switching on:
a. Press and hold the button at the side of the switch box.
b. Pull and hold the switch bar towards the handle.
Once the motor is running, you can release the button (1)
Switching off:
Release the switch bar.
NOTE:
period after the product has been switched off.
75 mm
To ensure safe operation the height adjustment
I
O
The cutting device will continue to rotate for a short
2
1
25 mm
53