Frymaster 8195985 Guide D'installation Et D'utilisation page 25

•
Turn unit ON by pushing the green ON/OFF switch. The ON/OFF markings
•
are (ON) and
•
Press on face of controller, which turns on the controller.
•
Low appears on the display, and the unit begins to heat to setpoint.
• Within 25 minutes, both the top and bottom elements will heat to preprogrammed setpoints.
Note: It is not unusual for the unit to rise above setpoint during initial warm up. It may
briefly display HIGH before stabilizing.
•
Redy is displayed on the controller when the unit has stabilized and setpoints are reached.
Product can now be placed in the drawer.
Product Holding Device
(OFF).
ON
Power Switch
9
OFF