Publicité
Machine Operation
Emergency Stop Button / Horn
In an emergency, strike the emergency stop to
disable the machine.
NOTE: After the Emergency Stop button has been pressed the Traction LED will flash 7 times, pause and repeat until the Emergency Stop button has been
reset and the machine switched off / on.
Maximum Speed Control
Set desired traction speed as required, depending on floor type and level of
soiling.
Once the Max speed has been set using the control knob on the control
panel,
fine adjustments can be made using the variable control speed pedal located
on the right side of the footplate.
!
Anti-tip System
The CRG 8055/8072 is equipped with an
Anti-tip system.
The machine automatically slows down preventing
the machine from tipping over if cornering at speed.
The buffers at the front are designed to prevent the
machine tipping in the event of the operator turning
sharply.
The buffers are designed to be replaceable when
worn.
18
www.numatic.co.uk
Care must be taken to reduce speed when cornering or manoeuvring.
for sounding a warning signal
Horn button -
!
Publicité
