Publicité
Les langues disponibles
Les langues disponibles
4. DESCRIPTION OF THE EBH UNIT
1
EBH units, thanks to their high pressure fan decks, permit to satisfy every request of heating
and cooling applications in big environments, where ducted air distribution is requested.
2
They are suitable for horizontal installation.
These are units for COOLING and HEATING applications; they are fed with cold and hot
water and used according to their relevant performance features.
3
EBH units are components of cooling and/or heating systems; consequently, they are with-
out any safety devices on the water circuit. These units have been designed for tempera-
tures up to 75 °C.
4
4.1 COMPONENTS
5
To identify the components in the air-handling unit you have purchased, see the exploded
drawing (Encl.1) listed in the section Enclosures of this manual.
6
4.2 TECHNICAL SPECIFICATIONS
7
Dimensional features are shown in the Enclosure 2. Technical specifications (standard)
concerning installation and use of fan coil units are listed on Enclosure 3 of this manual.
8
The technical data directly referred to the purchased unit are indicated on the identification
tag (Fig. 1) located on the side of the machine.
9
10
+
Fig. 1 - Label on the unit
•
Insulation class: I - Protection grade: IPX0
•
Protection grade of the motor: IP20
•
Thermal protection class of the insulation of the motor: F
•
Technical features of the heat exchanger:
Max pressure of the hot or cold water for water fan coil: 1600 kPa;
-
-
Min pressure of the hot or cold fluid: It is the one indicated by the designer/
installer for the correct functioning of the system;
28
Publicité
