Korg EFGSJ 4 Manuel D'utilisation page 14

MIDI
What can you do with MIDI?
Thanks to MIDI, you can use the C1/C1 Air to control other
instruments, use other instruments to control the C1/C1
Air, and use a sequencer to create complex musical pieces.
When you use the C1/C1 Air keyboard or pedal, or select
a sound, the notes, pedal activation and change in sound
are transmitted to another instrument, or are recorded by
a sequencer.
Connections
Commercially available MIDI cables are used to transfer
MIDI data. Connect these cables from the MIDI jacks of the
C1/C1 Air to the MIDI jacks of the external MIDI device that
you want to exchange data with. There are two types of
MIDI jack.
MIDI IN jack
This jack receives MIDI messages.
The MIDI IN jack lets you play the C1/C1 Air's sounds from
an external MIDI device (e.g., MIDI keyboard or sequencer).
Use a MIDI cable to connect the C1/C1 Air's MIDI IN jack to
your external MIDI device's MIDI OUT jack.
MIDI OUT jack
This jack transmits MIDI messages.
The MIDI OUT jack lets you control an external MIDI de-
vice using the MIDI messages transmitted from the C1/C1
Air. Use a MIDI cable to connect the C1/C1 Air's MIDI OUT
jack to your external MIDI device's MIDI IN jack.
MIDI function mode
When the C1/C1 Air is turned on, the MIDI parameters are
set to transmission channel 1, all reception channels (1–16),
Local On and Multi-Timbral On. These settings can be
changed from the MIDI function mode.
Setting procedure for parameters in the MIDI function mode
1. Hold down the FUNCTION button (for at least 3 sec-
onds).
The FUNCTION button blinks and the PIANO1 button
lights up.
2. Press the appropriate button shown below to select a
parameter.
The pressed button lights up, and the current setting ap-
pears in the display.
PC Filter
Local On/Off
MIDI channel
Multi-timbral
On/Off
3. Press the + or – button to select a setting.
4. To exit Function Mode, press the FUNCTION button.
The FUNCTION button goes dark.
All MIDI settings are applied to all sounds.
Normally, when the C1/C1 Air is turned off, all param-
eters return to their factory default settings.
14
CC Filter
Dump recorded songs
List of MIDI functions
Button Function
Description [default setting]
PIANO1 MIDI Channnel *1
1...16 [C01]
Specify the transmission channel for MIDI data.
PIANO2 Local On/Off
Enabling (turn on)/disabling (turn off) the
C1/C1 Air sound source
Disable (turn off) in order to prevent echo back.
E.PIANO1 PC Filter *2
Enabling/disabling program change trans-
mission/reception filtering [oFF: transmis-
sion/reception]
If an incompatible program change number is
received, the C1/C1 Air sound is not changed.
E.PIANO2 CC Filter
Enabling/disabling control change transmission/re-
ception filtering [oFF: transmission/reception]
HARPSI/ Dump recorded songs *3
CLAV
Sending/receiving recorded song data
VIBES/ Multi-timbral On/Off
GUITAR
Operating as a 16-part multi-timbral sound
module [on: operating]
*1: MIDI channnel
In Layer Mode, this setting will be the transmission chan-
nel for layer 1, and the transmission channel for layer 2 will
automatically be set to the following channel.
For example, if MIDI channel C07 is selected for layer 1,
MIDI channel C08 will automatically be specified for layer
2. If MIDI channel C16 is selected for layer 1, MIDI channel
C01 will be specified for layer 2.
*2: Table of sounds and corresponding program change
numbers.
CC0: Bank Select (MSB) for all sounds is set to 121.
Button Bank CC32 PC Sound
PIANO1 1 0
2 0
3 2
PIANO2 1 1
2 1
3 0
E.PIANO1 1 0
2 1
3 0
E.PIANO2
1 0
2 1
3 2
HARPSI/ 1 0
CLAV
2 1
3 0
VIBES/ 1 0
GUITAR
2 0
3 0
Setting Display
C01...C16
on, oFF
on
[ ]
on, oFF
on, oFF
ddd
on, oFF
0 German Grand Piano
1 Jazz Piano
0 Classic Piano
0 Japanese Grand Piano
1 Pop Piano
3 Honky-Tonk Piano
4 Stage Electric Piano
4 Bright Electric Piano
2 Electric Grand Piano
5 Digital Electric Piano1
5 Digital Electric Piano2
4 60's Electric Piano
6 Harpsichord 1
6 Harpsichord 2
7 Clav
11 Vibraphone
12 Marimba
24 Acoustic Guitar