Faema E71 E Utilisation Et Installation page 52

3. Electrical Installation Rules
that allows for complete disconnection when there is a category III overload and that provides
power-supply in compliance with installation rules.
If the power-supply is not working properly, the appliance can cause transitory voltage drops.
Check that the type of connection and voltage correspond with the information on the nameplate: see illustrations chapter,
Figure 1.
For machines with a Y connection: see illustrations chapter, Figure 2.
illustrations chapter, Figure 3.
For machines with a single-phase connection: see illustrations chapter, Figure 4.
4. Water Installation Rules
WATER REQUIREMENTS
Check on the machine's water inlet that the pH and chloride values comply with current law.
according to the hardness detected and machine usage.
WARNING
WATER CONNECTIONS
Hook up the water connections as shown in the Illustrations chapter, Figure 2, respecting the hygiene, water safety, and
anti-pollution laws in the country of installation.
Note Illustrations chapter,
Figure 3.
IMPORTANT Illustrations chapter, Figure 4.
6 EN