ST MCS 504 PRO Handle Serie Manuel D'utilisation page 60

we live. Try not to cause any disturbance to the surround-
ing area.
2) Scrupulously comply with local regulations and provi-
sions for the disposal of packaging, oils, petrol, filters, dam-
aged parts or any elements which have a strong impact on
the environment; this waste must not be disposed of as
normal waste, it must be separated and taken to specified
waste disposal centres where the material will be recycled.
3) Scrupulously comply with local regulations for the dis-
posal of waste materials after mowing.
4) When decommissioning, do not pollute the environment
with the machine, but hand it over to a disposal centre, in
accordance with the local laws in force
GETTING TO KNOW THE MACHINE
MACHINE DESCRIPTION
AND SCOPE OF APPLICATION
This machine is a garden tool and precisely a pedestrian-
controlled lawnmower.
The machine is essentially composed of an engine which
drives a cutting means enclosed in a casing, equipped with
wheels and a handle.
The operator is able to operate the machine and use the
main controls, always staying behind the handle at a safe
distance from the rotating cutting means. If the operator
leaves the machine, the engine and cutting means will stop
within a few seconds.
Intended use
This machine was designed and manufactured for cutting
(and collecting) grass in gardens and grassy areas, in ar-
eas in proportion to its cutting capacity, done by a pedes-
trian operator.
The presence of attachments or specific devices can pre-
vent cut grass from being collected or produce a mulching
effect, depositing cut grass on the ground.
This machine can:
• m ow, chop and deposit the grass on the ground
(mulching effect);
User types
This machine is intended for use by consumers, i.e. non-
professional operators. The machine is intended for "DIY"
use only.
Improper use
Any other usage not in keeping with the above-mentioned
ones may be hazardous and harm persons and/or dam-
age things. Examples of improper use may include, but are
not limited to:
– t ransporting persons, children or animals on the ma-
chine;
– l etting oneself be transported by the machine;
– u sing the machine to tow or push loads;
– u sing the machine for leaf or debris collection;
– u sing the machine to trim hedges, or for cutting vegeta-
tion other than grass;
– u se of the machine by more than one person;
– u sing the cutting means on surfaces other than grass.
IDENTIFICATION LABEL
AND MACHINE COMPONENTS
(see figures on page ii)
1. Acoustic power level
2. CE conformity marking
3. Year of manufacture
4. Type of lawnmower
5. Serial number
6. Name and address of Manufacturer
7. Article Code
8. E ngine rated power and maximum
operating speed
9. Weight in kg
11. Chassis
12. Engine
13. Cutting means
14. Handle
15. Throttle (if fitted)
16. Engine brake lever / cutting means
17. Drive engagement lever
18. Variable speed drive (if fitted)
As soon as you have purchased the machine, do not forget
to write the identification numbers (3 – 4 – 5) in the spaces
on the last page of the manual.
The example of the Declaration of Conformity is provided
on the penultimate page of the manual.
DESCRIPTION OF SYMBOLS INDICATED
ON THE CONTROLS (where foreseen)
21. Slow
22. Fast
23. Choke
24. Forward movement stop
25. Driving
25a. Engine stop
26. Idle
27. Engine ignition
SAFETY REQUIREMENTS – Your lawnmower should be
used with due care and attention. Therefore, pictograms
have been placed on various parts of the machine to re-
mind you of the main precautions to be taken. Their mean-
ing is explained below. You are also asked to carefully read
the safety regulations in the specific chapter of this manual.
Replace damaged or illegible labels.
41. W arning: Read the instruction handbook before using
the machine.
42. R isk of thrown objects. Keep all persons away from the
work area whilst mowing.
43. D anger of cutting yourself. Cutting means in motion.
Do not put hands or feet near or under the opening of
the cutting means housing. Disconnect the spark plug
cap and read the instructions before carrying out any
maintenance or repairs.
47. Beware of hot surfaces!
EN - 3