Hypertherm Powermax105 SYNC Mode D'emploi page 3

Introduction
Static electricity can cause damage to printed circuit boards (PCBs). Use correct
precautions when you touch PCBs.
Keep PCBs in antistatic containers.
Put on a grounded wrist strap when you touch PCBs.
Purpose
Powermax105 SYNC: This field service bulletin gives you the replacement procedures for the
3-phase power cord.
Powermax105 and Powermax125: For replacement procedures for the 3-phase power cord, refer
to the Powermax105 Service Manual (807580) or the Powermax125 Service Manual (808070).
Technical documentation is available at www.hypertherm.com/docs.
Tools and materials needed
Assorted Phillips

Blade screwdrivers

Assorted TORX

Large adjustable wrench

Powermax105 SYNC Field Service Bulletin
All manuals and user guides at all-guides.com
WARNING
ELECTRIC SHOCK CAN KILL
Disconnect electric power before doing installation or maintenance. You can
get a serious electric shock if electric power is not disconnected. Electric
shock can seriously injure or kill you.
All work that requires removal of the plasma power supply outer cover or
panels must be done by a qualified technician.
Refer to the Safety and Compliance Manual (80669C) for more safety
information.
NOTICE
® offset screwdrivers
drivers
®
810420
Power Cord and Strain Relief Replacement
3