Meade ETX-70AT Junior Manuel D'instructions page 51

oBsERVING EXERCIsEs
Go To saturn
After performing the Easy Two-Star Alignment procedure, the motor drive begins operating and
Note:
the telescope is aligned for a night of viewing. Objects in the eyepiece should maintain their
Keep in mind that
position even though the Earth is rotating beneath the stars.
when viewing
through the eye-
piece, images of
terrestrial objects
are right-side-up,
This exercise demonstrates how to select an object for viewing from Autostar's database. This
but reversed left-for-
example demonstrates how to select Saturn.
right. Normally, such
an image orientation
is not bothersome,
unless trying to read
a distant sign, for
1
example.
2.
If the telescope
3.
is to be used for
extensive terres-
4.
trial observations,
a correctly oriented
image is provided
5.
with the #933 45°
Erecting Prism.
Using the Guided Tour
This example demonstrates using "Tonight's Best" Guided Tour.
1.
2.
3.
4.
5.
6.
All manuals and user guides at all-guides.com
ImportANt Note Once aligned, only use the gO TO or Arrow keys to move the
:
telescope. Do not loosen the telescope locks (6 and 9, Fig. 1), or move the base
manually, or alignment will be lost.
Note: Saturn is not visible the entire year and you may need to choose another
object from Autostar's database; however, the procedure, as described below,
remains the same.
After the telescope is aligned, "Select Item: Object" displays. Press ENTER.
"Object: Solar System" displays. Press ENTER.
"Solar System: Mercury" displays. Keep pressing the Scroll Down key until "Solar System:
Saturn" displays.
Press ENTER. "Calculating" displays. Then "Saturn" and a set of coordinates dis-
plays. Saturn's (and other planets') coordinates change throughout the year.
Press GO TO. "Saturn: Slewing..." displays and the telescope slews until it finds Saturn.
You may need to use the Arrow keys to center Saturn precisely in the eyepiece. Autostar
then automatically slews (moves) the telescope so that it „tracks" Saturn (or whatever
other object you may have chosen); i.e., Saturn remains centered in the eyepiece. If an
object is observed in the telescope without using Autostar's GO TO or automatic tracking
capabilities (see „TO TRACK AN OBjECT AUTOMATICALLY," page 20), objects in the
eyepiece gradually drift out of the field of view due to the Earth's rotation.
After observing Saturn, press MODE twice so that "Select Item: Object" displays again.
Press the Scroll Down key twice. "Select Item: Guided Tour" displays.
Press ENTER. "Guided Tour: Tonight's Best" displays. Press ENTER.
Note: If you wish to try out other guided Tours, press the Scroll Down key to
scroll through other tour choices.
When the tour you wish to select
displays, press ENTER.
"Tonight's Best: Searching..." dis-
plays. After calculating, "Tonight's
Best: jupiter" displays.
Note: Different objects may be
displayed on a tour list on any
given night.
Press ENTER or Speed/? to display
information about the object. Press
GO TO to move the telescope to the
object.
Press MODE to return to the Tour
list. Press the Scroll keys to scroll
through the list. Press ENTER when
you find the next object you wish to
observe.
Press MODE repeatedly to leave
the Guided Tour menu.
TIps
FOR BEGINNERS
Which one's the Alignment
star?
If Autostar has chosen an alignment star with which
you are unfamiliar, how can you be sure if the star in
your eyepiece is really the alignment star?
The rule of thumb is that an alignment star is usually
the brightest star in that area of the sky. When you
view an alignment star in an eyepiece, it stands out
dramatically from the rest of the stars in that portion
of the sky.
If you have an obstruction, such as a tree or a
building blocking your view of the alignment star,
or if you have any doubts at all about the star that
has been chosen, no problem. just press the Scroll
Down key and Autostar will find another star to
align upon.
Observing Exercises 15