Burkert 8400 Manuel D'instructions page 23

5.8 Simulation Mode
To calibrate the extension
board (EXT) if present and
activated (see Calibration
mode).
To go back to the
previous function.
To go to the next function.
To test the switching
thresholds after entering a
temperature value (SIM) and
PRESSING THE ENTER
KEY.
To return (END) to the
display of the temperature in
the Normal mode.
8400
All manuals and user guides at all-guides.com
3
0......9
SIM
END
ENTER
1
Calibration parameters
of the extension board
ENTER
(see corresponding
manual).
010.9
ENTER
SIM
0......9
*
* To enter a negative value, select the character at
the left hand side of the display and press
until the minus sign appears.
23
ENTER
0......9