Burkert 8400 Manuel D'instructions page 12

All manuals and user guides at all-guides.com
Temperature Controller 8400
4 INSTALLATION
4.1 General recommendations
Always check the chemical compatibility of the materials the controller
is made of with the products it may be in contact with, for instance:
alcohols, strong or concentrated acids, aldehydes, bases, esters,
aliphatics, aromatics, ketones, aromatics or halogenated hydrocarbons,
oxidizing agents and chlorinated products.
For more information, please contact your Bürkert sales office.
4.2 Mounting on the pipe
The controller 8400 can be inserted into a Bürkert fitting S001 or S005.
During mounting, follow the instructions given with the fitting.
Ensure you do not
unscrew the metallic
part from the pipe,
when you re-position
the housing.
Do not tight the controller
For G1/2""-version, ensure Controller type 8400
using the housing ; use an
the gasket is in place mounted on a fitting
appropriate tool.
type S001