Burkert 8400 Manuel D'instructions page 16

All manuals and user guides at all-guides.com
Temperature Controller 8400
5 PROGRAMMING
5.1 General recommendations
Keep in mind that the process may be influenced by all the parameter
settings you make. Fill-in the table on page 22 with your settings of the
controller.
5.2 Functionalities
The device has three operating modes :
Normal Mode
Display of the measured temperature and the switching thresholds
programmed. From the Normal mode, you can access the Calibration
and Simulation modes.
Calibration Mode
Access to the programming of all the parameters (unit, output, filter, bargraph,
temperature adjustment, extension board parameters). From the Calibration
Mode, you can go back to the Normal Mode.
Simulation Mode
Entering a theoretical temperature value to test the configuration
programmed in the Calibration Mode. You may also calibrate the
optional extension board. From the Simulation Mode, you can go back to
the Normal Mode.